Filter
Top Products
For our valued customers, we do our best for each product and services to offer. We will
support our cutomers through our local sales and service network. TEAC supports this
product via its set-top box homepage with useful information and new software.
If you have any questions about this product, please consult the web page before contacting
out Total Care Hotline 1800-656 700 EST 9am to 5pm. Please have your software version
number ready before calling us. [Refer to MENU/SYSTEM INFORMATION page27]
Homepage : http://stb.teac.com.au
E-mail : info@teac.com.au
To provide you with the convenience of usage, TEAC has the right to make changes and
improvements to the products including the user manual without any notice in advance.
Copyright 2004 TEAC Australia Pty Ltd.
Throughout this manual the letters STB are constantly used. This stands for "Set-Top Box"
and refers to your DV-B420.
DEFINITION Throughout the manual, you will find the letters STB.
This stands for Set-Top Box.
MAIN SUPPLY AC 100~ 230V 50 / 60Hz 15W Max
CABLE Use standard certified cables to prevent any malfunction of
the STB.
LOCATION 1. Keep the STB indoors and away from potential hazards, such as
houseplants, rain and direct sunlight.
2. Do not put any thing over the STB.
CLEANING 1. Always disconnect the STB power cord from the wall socket
before cleaning it.
2. Use a light damp cloth(no solvents)to clean the case.
OVERLOADING Do not overload wall outlets, extension cords or adapters.
These can cause fire or electrical shock.
VENTILATION 1. Do not block ventilation slots of STB.
2. Do not place the STB on soft furnishings or carpets.
3. Ensure that a free airflow is maintained around the STB.
4. Do not allow the STB to be exposed to direct sunlight or a heater.
5. Do not stack other electronic equipment on top of the STB.
LIQUIDS Keep liquids away from the STB.
Apparatus shall not be exposed to dripping or splashing and no
objects filled with liquids, such as vases, shall be placed on the
apparatus.
LIGHTNING 1. The Manufacture's instructions for safe guarding other
equipment connect to the STB, such as a television set,
must be followed during lightning conditions.
2. Ensure lightning protection devices for the terrestrial
antenna, and mains are installed.
Safety Instructions
This STB has been manufactured to meet Australian safety standards.
Please read the following safety instructions carefully before you handle the STB.
Support & Copyright