Teac DVD Receiver DVD Player User Manual


 
38
Settings (GENERAL SETUP)
TV DISPLAY
The shape of the TV or monitor may not match the shape of the
movie frame. To avoid distortion on older TVs, you may need to
change the way in which the image is displayed. TVs use a 4:3 aspect
ratio; high-definition TVs use 16:9 aspect ratio (as do movies).
Note:
You may need to read your TV’s manual in conjunction with this
section in order to achieve the best results. Some discs do not allow
the aspect ratio to be changed and you will therefore have to change
the aspect ratio on the TV.
Make this setting while playback is stopped; you cannot do
this while playing back a disc.
4:3 PAN SCAN
This mode is used with 4:3 TVs. 4:3 images are displayed normally.
When showing 16:9 programmes, the full height of the screen is
displayed, and the left and right part of the image are cut off.
4:3 picture 16:9 picture
4:3 LETTER BOX
This mode is used with 4:3 TVs. 4:3 images are displayed normally.
16:9 images are visible at their full width, but there are blank area
at the top and bottom of the screen.
4:3 picture 16:9 picture
16:9
Use with a 16:9 wide TV.
4:3 picture 16:9 picture
< Some wide-screen discs that do not permit the Pan Scan mode
playback are automatically played in Letter Box mode.
< Depending on the DVD, 4:3 Letter Box may be selected
automatically instead of 4:3 Pan Scan and vice versa.
< If 16:9 (Wide) is selected and a normal TV is connected, 16:9
content will appear distorted during playback (objects look thin).
OSD (On Screen Display) LANGUAGE
Select the desired language for onscreen menus of DR-H338i from
the following:
ENGLISH (Default)
FRANÇAIS
DEUTSCH
ITALIANO
ESPAÑOL
NEDERLANDS
SCREEN SAVER
ON (Default)
The screen saver starts up if nothing is played back and no
operations are performed for 4 minutes.
OFF
The screen saver does not start up.
DIVX(R) CODE
In case you need the registration code to play DivX files, select this.
The registration code of the player will be displayed.