Filter
Top Products
Settings
10
Although the automatic programme scan sets
all available channels/programmes, the menu
Programmes allows you to make changes in
the programme list.
The TV set provides for three options:
- manual setting of programmes
- Repeat automatic (TTS) scan
- Change order of channels
➜ Press the MENU key to display the Main Menu.
➜ Use the Programme keys to mark the menu item
Programmes, then press the OK key to select.
The menu Programme will be displayed.
➜ Use the OK key to select the menu item
Programme Settings.
A list of programmes stored in memory will be dis-
played.
➜ Use the Programme keys to mark the programme
slot you wish to change, then press the OK key to
select
Hint: Using the Volume keys, you can move aro-
und in the list in blocks of ten channels at a
time.
The programming menu of the selected channel will
be displayed.
This programming menu will contain varying
points, depending on whether a satellite
channel is selected via a built-in satellite
module, or whether a terrestrial or cable
channel has been selected.
The following programming instructions
should be used for channels supplied by a
terrestrial antenna, or by a cable network.
In order to adjust a terrestrial or cable chan-
nel, TER must be selected as the source.
➜ Use the Programme keys to mark the menu item
Source.
➜ Use the Volume keys to select TER, then press
the OK key to store in memory.
➜ Use the Programme keys to mark the menu item
Channeltype.
➜ Use the Volume keys to select the C- or S-chan-
nel, then press the OK key to store in memory.
Hint: Information on the channel availability at your
place of residence will be provided by your
local cable provider.
➜ Use the Programme keys to mark the menu item
Channel.
➜ Use the Volume keys or the 0 - 9 keys on the
numeric keypad to select the channel, then press
the OK key to store in memory.
➜ Use the Programme keys to mark the menu item
Fine Tuning.
➜ Use the Volume keys to determine the best image
quality on screen, then press the OK key to store
in memory.
Your retailer will be able to advise you on the
norms/standards used by foreign channels.
German channels generally utilise the B/G
norm.
D/K Eastern Europe
I(I+) Great Britain
L(L') France
➜ Use the Programme keys to mark the menu item
Norm.
➜ Use the Volume keys to select the norm, then
press the OK key to store in memory.
Channel settings
Manual setting of channels
Programming for terrestrial resp. cable
channels
Source
Channel Type
Channel
Fine Tuning
Norm (Standards)