Filter
Top Products
Settings
20
The TV set has an internal clock, as well as
several timers.
You will generally not have to set the date
and time, as the internal clock is set automa-
tically each time the set is switched on. The
correct time is downloaded from the tele text
information of whichever programme has
been stored in programme slot 1.
So that the timer function is available to you
even under unusual reception conditions,
(e.g. if your TV set is to be used in a distant
foreign country, or if the SCART connection is
used to supply the TV signal to the set), pro-
vision is made for this to be set manually in
the menu Clock.
The time setting is retained while the TV set
is in standby mode.
➜ Press the MENU key to display the Main Menu.
➜ Use the Programme keys to mark the menu item
Timer, then press the OK key to select.
➜ Use the Programme keys to mark the menu item
Clock, then press the OK key to select.
The menu Clock will be displayed.
Time and date can be set on this menu.
Menu Timer Menu Clock
➜ Use the Volume keys to move around the fields in
which you wish to enter data, and use the
Programme keys to change the values.
➜ Use the OK key to accept the time display.
➜ Press the MENU key to return to the menu Timer,
or press the RADIO/TV key to return to the TV pic-
ture.
Four timer blocks are available for automatic
video recordings; in each case, the program-
me slot, as well as the date and time for
beginning and end of the recording (switching
TV set on and off) can be entered. When a
timer has been set, the TV screen and sound
section are switched off, so that the TV set
draws less current than during regular opera-
tion. The times set for the various timers may
not overlap, i.e. each timer block must be
completed before the start of the next block.
As the internal clock may be slightly inaccura-
te, and as broadcast times for TV program-
mes may differ slightly from published times,
you should plan for a slight reserve in your
timer settings. The exact recording time will
be determined by the video recorder.
➜ Use the MENU key to display the Main Menu.
➜ Use the Programme keys to mark the menu item
Timer, then press the OK key to select.
➜ Use the Programme keys to mark the menu item
Programme Timer, then press the OK key to sel-
ect.
The menu Programme Timer will be displayed.
➜ Use the Volume keys to select on of the four
Timer No., then press the OK key to store in
memory.
➜ Use the Programme keys to mark the menu item
State, then use the Volume keys to set.
➜OFF Timer is deactivated
➜ONCE Timer switches on and off once
➜DAILY Timer switches on and off daily, inde-
pendent of the date
➜WEEKLY Timer switches on and off on the
same weekday
➜ Press the OK key to store in memory.
Timer / Clock
Clock (Time)
Programme Timer