TechniSat CAM 1 plus Satellite TV System User Manual


 
Demultiplexing: in accordance with ISO 13818-1
Common Interface
Type 2 Common Interface slots for CI-modules
(situated behind flap on front panel)
Current consumption max. 0,3A/5V for each module
Video decoding:
Video compression Compatible with MPEG-1 and MPEG-2
Up to MP@ ML (main profile @ main level)
Video standard PAL / 25 Hz
Active image area 720 pixels x 576 lines
Picture formats 4:3 / 16:9
Picture input 16:9 Automatic adjustment for 16:9 TV sets via SCART connection
Letterbox filtering for 4:3 TV sets
Audio decoding:
Audio compression MPEG-1 and MPEG-2 Layer I and II
Audio mode Dual (main/sub), stereo
Sampling frequencies 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Audio parameters:
Analogue output:
Output level L/R 0.5 V RMS (nominal)
Output impedance 600 Ohm
THD >60 dB (1 kHz)
Crosstalk < - 65 dB
Analogue input:
Input level L/R 0.5 V RMS (nominal)
Input impedance > 40 kOhm
Volume at Switch-on Automatic use of previous volume setting
Digital output:
Output level 0,5 Vss into 75 Ohm
Sampling frequencies 32 kHz, 44.1 kHz, 48 kHz
SP/DIF-Output elektrical, cinch-connector
optical, Toslink
Video parameters:
Input:
Input level FBAS 1 Vs-s +/- 0.3 dB into 75 Ohm
Input level RED 0.7 Vs-s +/- 0.1 Vp-p into 75 Ohm
Input level GREEN 0.7 Vs-s +/- 0.1 Vp-p into 75 Ohm
Input level BLUE 0.7 Vs-s +/- 0.1 Vp-p into 75 Ohm
Teletext filtering in accordance with standard ETS 300 472
Entry teletext data (FBAS) corresp. to ITU-R BT.653-2; lines: 6-22 and 320-335
TV-SCART:
Output FBAS with RGB, or only FBAS, or only S-VHS (switchable)
TechniLink data-communication via pin 10
VCR-SCART::
Input FBAS with RGB or S-VHS
Output FBAS or S-VHS
42
bed_anl_TechniBox CAM1plus_engl.qxd 30.03.01 14:50 Seite 42