Filter
Top Products
> Confirm with OK.
The sub-titles will now be displayed in the language selected.
You can also use this procedure to select another language for sub-titles. Please note that
this function is only available when sub-titles are actually being broadcast. Also, this manual
selection will be lost (i.e. not stored in memory) when changing to other programmes.
6.13 Electronic Programme Guide
The EPG or Electronic Programme Guide will allow you to view programme details and con-
tents of various programmes on your TV screen. This can provide you with a quick overview
of the current day's programmes and those of the next few days.
The EPG functions allow you to
- Preselect programmes which will then be automatically switched on when they start
broadcasting;
- Programming of timers
- View information about programme contents on the screen
- Select programmes according to categories, and to view accordingly.
6.13.1 Entering EPG data
Your receiver will update programme information daily, at 05h00, provided it is in standby
mode at that time.
The receiving of data will be shown by EPLd on the receiver display. If your receiver is swit-
ched on at this time, the download of information will not take place
If you press the EPG key within 5 seconds after switching off the receiver (into standby
mode), you can also initiate a download manually.
The duration of the download will depend on the number of programmes being updated. The
system will show programmes up to a maximum of seven days in advance. As the number of
available programmes increases, so the volume of data will cause a reduction in the period
of time that can be previewed in the Electronic Programme Guide.
You can decide for yourself which programmes should be included in the Electronic Pro-
gramme Guide, the details can be entered as described in Point 7.5.
6.13.2 Interrupting EPG download
The process of downloading data can be interrupted by switching on the receiver (key
On/Standby). The data as per the last previous download still remains available.
6.13.3 Viewing the Electronic Programme Guide
> Switch on your receiver as well as your TV set.
> Press the EPG key on the remote control of your receiver.
The Electronic Programme Guide will now be displayed on screen. The list will inclu-
de the programmes preprogrammed at the factory, or those selected by you. You can
now use the EPG functions to set (Set) the programme, to Preselect it, or to
mark it for timer programming (Activate VCR)
You can also obtain information on the content of various programmes from the EPG
function.
6.13.4 Now (Display of current programme contents)
The first tables to be displayed will be those of programmes currently being broadcast (Now).
The yellow bar right from the programme name shows the past time of the current program-
me.
21
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 21