Filter
Top Products
> Use the up/down arrow keys to mark the entry Search.
> Confirm with the OK key.
The sub-menu >Search will be displayed.
> Use the arrow keys to select the search mode to be used.
> Press the OK key to display the relevant sub-menu.
7.7.1 All
When this search mode is activated, all satellites and transponders available in the system
will be scanned. At the end, new programmes will be displayed in red type in the program-
me/channel list.
> Use the up/down arrow keys to select the All option.
> Confirm with the OK key.
The legend "Start search" will appear on the display.
> Press OK again to start the search
> The search can be terminated at any time by pressing OK.
It is quite likely that a full scan may take 15 minutes or longer.
Please note any notes and information displayed on the screen.
7.7.2 Satellite
This search mode can be used to search a specific satellite. All other satellites will be
ignored in this mode.
> Use the up/down arrow keys to select the Satellite option.
> Confirm with the OK key.
The legend "Start search" will appear on the display.
> Before proceeding further, you will still have to select the satellite to be scanned.
Press the OK key.
A selection window will appear with the four available satellite positions.
> Use the up/down arrow keys to select the satellite.
> Confirm with the OK key.
> Use the up/down arrow keys to mark the entry Start search.
34
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 34