Filter
Top Products
6
3 Please read this first
NOTE:English-speaking customers - the default setting of your receiver is German.
You should go directly to Chapter 5 to change the setting to English (point 5.1
on Page 12)
> Before connecting the receiver, first check that you have received all necessary parts.
The following are included:
1 receiver 1 mains cable 1 remote control unit
1 instruction manual 1 guarantee card 2 batteries (1.5V size AAA)
> Insert the enclosed batteries in the battery compartment of the remote control unit,
ensuring the polarity is correct as indicated
> Before switching on the receiver, please first read the safety hints in Chapter 3
> Chapters 4 and 5 show you how to adjust and connect the receiver so that it con-
forms to the requirements of the external unit (dish antenna, LNB, etc.) as well as to
those of the TV set, VCR, etc. These settings have to be made only once when com-
mencing operation, and only need to be augmented when you attach additional
equipment to the set-up, or if the specifications of your external unit are changed.
> Chapter 6 describes all functions required for everyday usage, such as volume
adjustment and programme selection.
> Chapter 7 shows you ways of setting additional programmes, and of changing the
order of programmes.
> Technical terms used in the instruction manual are explained in Chapter 8.
> Technical data and specifications are to be found in Chapter 9.
> Hints on finding and correcting faults and malfunctions are described in Chapter 10.
Disposal Instructions:
The packaging of your receiver consists entirely of recyclable and re-usable materials. Plea-
se dispose of these in the manner prescribed by your local authorities ("Dual System" in Ger-
many). Please note that spent batteries (from the remote control unit) as well as general
electronic components should not be disposed of in domestic garbage, but must be disposed
of in special containers, or returned to the retail stockist, as local regulations may prescribe.
Important hints on Usage
The use of a so-called "On Screen Display" (see example of screen shots) simplifies the use
of the receiver, and makes it possible to manage with fewer buttons on the remote control
unit. All functions are displayed on the TV screen, and can be adjusted with a few clicks of
the button.
Functions that logically belong together are combined into a single "MENU".
The function selected is marked by a blue background in the relevant line. A short comment
on the selected function is shown in the lower half of the display.
Terms used in the OSD menu are shown in bold type in this instruction manual.
Example:
> Use the button MENU to open the Main Menu.
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 6