Filter
Top Products
SLEU063
TVP5160EVM User’s Guide 23
7. The write to register command is written as follows:
WR_REG, <DeviceFamily>, <Number of data bytes (N)>, <subaddress>,
<Data1>,…, <DataN>
or
WR_REG, <Literal slave address>, <Number of data bytes (N)>, <subaddress>,
<Data1>,…, <DataN>
The valid device family mnemonics are:
VID_DEC for the video decoders
VID_ENC for the video encoders
THS8200 for the THS8200 device
WinVCC4 translates the device family mnemonic to the slave address that was selected
on the WinVCC4 Configuration dialog upon program startup. This eliminates having to
edit command files if the alternate slave address must be used.
If the literal slave address method is used, then the slave address entered will be used
directly. This method is normally used for programming the video encoder.
8. A delay may be inserted between commands using the WAIT command, which is written
as follows:
WAIT,<# milliseconds>