Filter
Top Products
SLEU063
TVP5160EVM User’s Guide 27
8.5.2.3 Generic I
2
C Register Editor
The Generic I2C Editor, as shown in Figure 15, allows the display and editing of any device on
the I
2
C bus. This editor works like the Register Map Editor, except that the I
2
C slave address
must be entered and the Read All button is disabled.
To open this, click on Edit Register Map in the Edit menu and then click on Generic I2C.
The video encoder module registers can be edited using I
2
C subaddress 0x54 (default) or 0x56,
if the alternate slave address is being used.
Figure 15. Generic I
2
C Register Editor