Filter
Top Products
General operation
EN
13
Switching the set on and off
To s witch the TV set on, put the main power switch located at the rear
on the ON position, then press the power button located on the front
panel.When the set is on, the light on the front is green.
Standby mode: press the power button on the front panel.When the TV
set is in standby mode, the light on the front is orange.
Volume
Volume control: use the buttons on the front panel or the remote
control to increase and decrease the volume.
Sound mute: press the button on the remote control to temporarily
mute the sound.
To r estore it, press the button again or use the
+/- button.
Displaying status information
In TV mode, press the yellow INFO button on the remote control to
display the number and name of the channel you are watching, the zoom
format, the type of sound, and the remaining time if the sleep timer is on.
In PIP mode, the PIP display mode is displayed with the number and name
of the channel or the AV programme number and the type of signal
transmitted.
The number and name of the channel are displayed whenever you turn
on the set or change channels.
Accessing TV channels
Using the numeric buttons:
- For channels 1 to 9, press the corresponding button.
- For two-digit channels, first press the 0 button, then the channel
number (e.g. type 012 for channel 12), or enter the two digits quickly.
Using the
PR+/- buttons: scan through the programmes.AV programmes
are not accessible.
Accessing AV programmes
Press the AV button to display the last selected AV programme and scan
through the other AV programmes.
42pb120S4-en 2/07/04 11:32 Page 13