Technicolor - Thomson 42PB120S4 Flat Panel Television User Manual


 
Remote control
EN
6
Most of your television’s functions are
available via the menus that appear on the
screen.The remote control supplied with
your set can be used to navigate through
the menus and to configure all the general
settings.
IMPORTANT:
If the batteries in your remote control are run
down, you can use the buttons on the front of the
set, as they have the same functions as those of
the remote control.
Standby / quit standby.
To access TV mode.
Press this button to control the television.
To access VCR mode.
To access DVD mode.
To access SAT mode.
To access AUX mode.
To access AMP mode.
To provide information:
-it lights up when you press a button,
-it indicates the status when the remote control is being
programmed (see page 8 ),
-if the batteries are run down, it flashes when you press a
button.
To scroll the various PIP display modes.
To swap the main picture with the PIP picture.
Inactive.
To change programmes within the PIP function.
To change position of PIP on screen.
Inactive.
Inactive.
(red button) To access the sleep timer.
(green button) Inactive.
(yellow button) To access status information.
(blue button) Inactive.
(purple button) To access teletext.
The coloured buttons can also be used for operating Teletext.
To select menu options.
To set functions, change values, enable and disable functions
(checkbox) in menus, and use the zoom function.
To confirm a selection.
To access the OVERVIEW menu.
To exit the menu structure.
In PIP mode: to disable the PIP function.
To control the volume.
To s witch the sound off and back on again.
Inactive.
To change channels.
To select a channel by its number. In the case of channel
numbers with two digits:
- press the two digits quickly, or
- press
0
to display “--”, then enter the channel number.
Enter numeric values in menus.
To select an appliance connected to an AV socket.
Inactive.
TV
VCR
DVD
SAT
AUX
AMP
light
PIP
SWAP/
SLEEP
PIP+/PIP-
ZOOM/
FREEZE/
LIGHT
PRESETS
LIST
INFO
GUIDE
TEXT
OK
MENU
EXIT
+/-
RETURN
PR+/-
0-9
AV
DEMO
42pb120S4-en 2/07/04 11:32 Page 6