Technicolor - Thomson DTH231 DVD Player User Manual


 
Connections and initial set up
5
EN
EN
VIDEO sockets and cables (for image)
3 -
Component output (Y, P
R,PB)
YP
B
PR
sockets deliver an optimum image quality due to the separation of the
video signal into three separate components (comparable with RGB
separation in a Scart-Peritel cable).
In order to obtain the best possible image quality, always use very high quality
cables for the connections.Your dealer can provide Y, Pr, Pb cables that are
sold together and come in the standard colour codes (red, green and blue)
used for these types of sockets and cables.
Note: Do not forget to also connect the audio cables, because Component cables
only transmit images, and not sound.
4 -
Video out selector (
RGB/YPR
PB
)
RGB for Scart Peritel our socket
YPrPb for Progressive Scan out socket
If you connect your player to a monitor (or other equipments) set equipped
with a Progressive Scan function (using out sockets
Y, P r, P b ) you must set
the
COMPONENT VIDEO OUT selector on these sockets (slide it to the
right) and validate the function in the Display menu (see page 23). If the TV
set is connected to you player using the
TV AUDIO VIDEO OUT socket
leave the selector on the corresponding position (slide it to the left), and
check that the Progressive Scan function is turned off in the Display
menu.
Note: Setting the selector on TV AUDIO VIDEO OUT enables a Composite
(CVBS) and RGB signal to be delivered to the corresponding Scart-Peritel socket. If
you set the selector on COMPONENT VIDEO OUT only the Composite (CVBS)
signal will be available on the TV AUDIO VIDEO OUT socket; if, moreover, the
Progressive Scan function is activated in the Display menu, no video signal will
come through the TV AUDIO VIDEO OUT socket. In that case only the
COMPONENT VIDEO OUT socket swill deliver video signals.To return the video
signal to the TV AUDIO VIDEO OUT socket you must slide the selector to the
TV AUDIO VIDEO OUT position.
5 -
S-Video out socket (Y/C)
The S-Video socket delivers a lower quality video signal than component
sockets.An S-Video signal however provides a better quality image than a
composite video socket, because colour (C) is separate from black and white
(Y) in the video signal.
Note: Do not forget to also connect the audio cables, because the S-Video cable
transmits images and not sound.
6 -
Composite Video Out socket (
CVBS
)
The yellow video socket is also called composite video, or CVBS.The image
quality delivered by the video socket is the least good of all video
connections. Only use this socket if all other sockets are already in use.
RCA sockets and
cables for
Y, Pr, Pb Video
signals, also called
Component.
Hoshiden socket and
cable for Y/C Video
signal, also called
S-Video.
RCA socket and
cable for CVBS
Video signal, also
called Composite.
Video out selector
2_DTH231_EN 21/08/03 15:50 Page 5