Filter
Top Products
15
Audio connections
GB
GB
Dolby Digital
“Dolby”, “Dolby Digital”,
and the double-D symbol are
trademarks of Dolby
Laboratories Licensing
Corporation. Copyright 1992
1997 Dolby Laboratories
Inc. All rights reserved.
DTS is a digital Sound compression
technique. “DTS” and “DTS Digital”
are trademarks of Digital Theater
Systems, Inc.
Logo registered by
PHILIPS Corp.
MPEG Multichannel
DIGITAL OUT
Dual connection: digital
and analog.
• Select the type of digital audio
output in the set-up menu (see
page 16) to deliver:
• in digital: the Dolby Digital as
a digital data “BITSTREAM”
• in digital for the DTS (Digital
Theater Sound Systems) signal,
select DTS ON.
• in analog: the multichannel
MPEG-2 audio signals, as an
analog “PCM” stream.
D Connecting an “advanced”* 5.1 channel Amplifier / Dolby Digital Decoder
without a multichannel MPEG-2 decoder and with DTS decoder
ANALOG AUDIO OUT
DIGITAL AUDIO OUT
PCM / BITSTREAM
S/W
R2 L2
R1 L1
R2 L2
R1 L1
V2
V1
CENTER
MIXED AUDIO OUT VIDEO OUT
S-VIDEO OUT
COAXIALOPTICAL
• Then configure the speakers:
- on your DVD player (see pages 37-39) for MPEG-2 audio discs.
- on your Amplifier / Decoder (refer to its documentation) for Dolby Digital discs.
- to read the 5.1 channel MPEG-2 audio discs on a DVD disc, turn on the advanced input (5.1
channel analog) on the amplifier to be able to use the DVD player’s MPEG-2 decoding.
Cinch audio cable
(not included)
*
Coaxial audio cable or optical digital
audio cable (not included)
Amplifier / Decoder Dolby Digital
When connecting
the optical audio
digital cable:
1. Remove the protection cap from the connector and
connect it firmly as shown on the drawing.
2. Keep the protection cap and always reattach the cap
when the connector is not in use, to keep it dustfree.
TV
*
AV1/TV
AV1
DTH4500-GB 7/09/00 13:33 Page 15