Filter
Top Products
Connections and initial set up
5
EN
EN
6. Select your country of residence using the or
keys, and press
OK.
Note: the arrows indicate that other countries are available.
To find your country, use the buttons on your remote
control.
7. On the screen that is displayed, the Automatic
option is already selected. Press
OK.
8. An installation window will appear.A cursor shows
the progress in the set-up of the channels.You will
need to wait a fair amount of time.When all the
channels that you can receive in your area have been
stored, 100 % is indicated.The number of channels
found is indicated by XX channels found.
Press
OK.
Continue on the next page …
Automatic channel search
In each region,TV stations are broadcast on different channels.Your DTH 8005 cannot be factory-
set to receive the TV channels of your area.You will have to set up the channels by following the
automatic procedure recommended below.
Note:Your DTH 8005 is equipped with the AV Link. function.This function simplifies channel set-up by
downloading them from an AV Link or similar television set (Easy Link, Smart Link, Megalogic, etc.) which is
already set up.The channels downloaded in this way keep the same characteristics as those of your TV set
(same number, name, etc.).Your DTH 8005’s AV Link downloading function is enabled (factory setting).When
first turning on the DTH 8005, if the television is turned on, it will download the channels already installed in
your television set. If you wish to de-activate this function, see page 52.
2_DTH8005_en 9/03/04 17:19 Page 5