Filter
Top Products
Menus
53
EN
EN
Recording Options Menu
Your DTH 8005 has several practical functions to optimise the recording quality / recording time
ratio that is possible when using a DVD+R or DVD+RW disc.This menu also allows the
VPS/PDC function to be activated for all your programmed recordings.
1. From the main menu select Setup using the keys, then confirm with OK.
2. Select Recording Options with the keys, then confirm with OK.
3. Select an option with the keys, confirm with OK, adjust and confirm with the
keys and
OK.
Recording quality
Your DTH 8005 can record several hours of TV programmes or video sequences from a
connected device.This capacity depends on the discs and the quality adjustment selected in the
Recording Options menu.
Note: all times are approximative.Access to the adjustment
menu is impossible if recording is underway.
Depending on the adjustment selected, the recording time of
a DVD+R or DVD+RW disc is as follows:
*1 : Best - 1 hour.
*2 : High - 2 hours.
*3 : Good - 3 hours.
*4 : Normal - 4 hours.
*5 : Basic - 6 hours.
*6 : Low - 8 hours.
SmartRecord™
This function allows you to avoid manipulation errors when you wish to record a programme on
a disc that is almost full. By activating the SmartRecord™ function your DTH 8005 will adapt
the recording quality by positioning it automatically to one of the 6 settings in order to permit
entire recording of the desired programme.
VPS/PDC
Triggers all your programming at the actual broadcast times (if the channel broadcasts VPS/PDC
signals).
Note: the VPS (Video Programming System) and PDC (Program Delivery Control) signals are transmitted at
the same time as certain programmes, by certain channels and in certain European countries. Leave this
function active to benefit from its benefits for all your programming. If the channel does not broadcast VPS or
PDC signasl, your DTH 8005 will record at the start and stop times selected during the programming of the
recording (page 23).
2_DTH8005_en 9/03/04 17:21 Page 53