Filter
Top Products
15
Advanced functions
EN
VCR
Auto tracking
The video recorder automatically adjusts the tracking to provide the best picture quality.The
message A.TRACKING is displayed when this function is in operation.
If the quality of the recording is poor, repeatedly press the and buttons on the remote
control to manually adjust the tracking until all distortions have been removed. Press the
0 button
on the remote control to restore the standard setting.
Setting the clock
The video recorder uses a 24 hour clock.To enter a single digit number, first press the 0 button
(e.g. 01 for 1).
1. Press to access the main menu. Use the and buttons to select TIME DATE then
press
ok.
2. To set the clock manually,set the AUTO ADJUST function on OFF using and .Press
ok to adjust the date and time.
3. Use the numbered buttons on the remote control to enter the HH (hours), MN (minutes),
DD (day), MM (month) and YY (year).
The day of the week is automatically displayed once the date has been entered. If you make a
mistake use and to select the item and re-enter the details.
4. When you are finished, press to store your settings.The new time is displayed on the front
display.
Note: If Auto Adjust is on and the signal is sufficiently strong, the clock settings will be automatically checked
against teletext and adjusted as necessary.
Colour standards
The video recorder comes with an automatic colour standard detection system.When playing a
tape causes problems (scrambled pictures or black and white), you must force the play mode by
selecting one of the available options (PAL,MESECAM).
If you wish to record a tape in a particular colour
standard, choose one of the displayed options.
1. Press to access the main menu.
2. Use and to select SYSTEM then press ok.
3. Use and to select a colour system.
4. Press to exit the menus.
Language selection
To select the language of the menus.
1. Press to access the main menu.
2. Select ABC using the and buttons.
3. Press ok to display the various menu languages.Select your language using the and
buttons.
4. Press to store the settings.
AB
C
OSD
SYS-
TEM
12
TIME
DATE
i
SYS-
TEM
AUTO
PAL
MESECAM
DTH6100U_EN 18/07/03 13:46 Page 15