Filter
Top Products
Advanced functions
16
EN
VCR
Video Doctor
The video doctor will show the status of various features of the video recorder.
1. Press to access the main menu.
2. Select Dr. with the and buttons.
3. Press ok.
4. Use the and buttons to check the following features:
HEAD STATUS
PLEASE CLEAN:The tape heads need cleaning.
TAPE STATUS
NOT RECORDABLE: The protection tab of the tape
loaded the video recorder is broken; insert a tape suitable
for recording.
NO. OF TIMER PROGRAMME: Shows the number of
timer recordings programmed.
NEXT TIMER PROGRAMME: Shows the date and
time of the next recording.
5. Press to remove the menu from the television screen.
Sound settings
The video recorder can record and play back stereo sound.You can select the way sound is
played back.
1. Press to access the main menu.
2. Select AUDIO with the and buttons.
3. Press ok.
4. Use the and buttons to choose between: STEREO, LEFT (left channel only), RIGHT
(right channel only), MONO.
5. Press to exit the menu.
On screen display (OSD)
This function is used to display the current time, tape counter, tape remaining, date, day of week,
channel and operational mode of your video recorder on your television screen. If a recording is
taking place, the on screen displays will not be recorded onto tape.
1. Press ok to show the OSD.
2. Press ok repeatedly to scroll the various display
options.The tape counter and amount of tape left will
appear only if a tape is loaded.
3. After 3 seconds most parameters are cleared leaving
only the clock or the tape counter and the amount of
tape left on the television screen.
4. Press ok again to remove all OSD’s from the
television screen.
AUDIO
Dr.
VCR
STOP
SP
FR2
1.01.03 WED 12:00
i
Dr.
VCR
VIDEO DOCTOR
OK
HEAD STATUS
TAPE STATUS
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
DTH6100U_EN 18/07/03 13:46 Page 16