Filter
Top Products
Operation
10
EN
Setting the time
The TIME menu can be used to set the time on the TV set and program the automatic sleep timer or wake-up timer
functions.
Display the OVERVIEW menu by pressing the MENU button. Select the Time option and press OK to confirm.
Setting the time
1. Select the Time ref. PR option.
2. Enter the number of the channel which the time will use as a reference point, or select it from the list using the or
PR+/PR- buttons.The time is displayed after a few seconds if it is available on the selected channel.
the setting -- is automatically selected under the Time ref. PR option.
If the time is not provided by the channel selected under the
Time ref. PR option, this means the time is not set.To
set the time manually, select the Time option and enter the time using the numeric or buttons. In this case, the
setting -- is automatically selected under the Time ref. PR option.
Note: if the power supply is disrupted (i.e. the set is switched off using the on/off button or unplugged, or there is an electrical fault), the time will
disappear if it has been entered manually.You must reset it.We therefore recommend you find the time on a channel and check that it is correct.
Once the time has been set you can use the Wake up timer and KidPass functions.
Programming the sleep timer
1. Select the Sleep timer option.
2. Set an automatic shut-off time (from 0 to 4 hours in 15-minute intervals) by using the buttons. Set the time to
00:00 to disable this function.
Programming the wake-up timer
This function can be used to set the time for the set to come on, for instance, for the television to wake you up.
1. Select the Wake up timer option and press OK to check the box, which enables this function and provides access to
the relevant options.
Note: the volume at wake-up will be set at the same level as when you enabled this function.
2. Under the Wake up time option enter the wake-up time using the numeric or buttons.
3. Under the Wake up PR option enter the number of the channel you want to wake you using the or numeric
buttons.
Note: if you have programmed a wake-up and are not there when the appliance comes on, it will automatically switch off after two hours if no
activity using the buttons on the front of the set or the remote control has been detected.
Parental control
The parental control functions allow you to limit your children’s access to the television.This means that you can set a
maximum time for your TV to operate every day using the KidPass function and/or lock the buttons located on the front of
the TV set.These functions are protected using a PIN code.
Accessing the KIDPASS menu
1. Display the OVERVIEW menu by pressing the MENU button. Select the KidPass option and press OK to confirm.The
PIN CODE menu appears.
2. If a PIN code has not been set, enter a four-digit code. On the screen the numbers are replaced by asterisks.
Note: choose a code that will be easy enough for you to remember.
3. Enter your code again to confirm it, then once more to access the KIDPASS menu.
After this, if just one of the functions limiting access is active, you will not be able to access the
KIDPASS menu until you
have entered your PIN code.
Defining the conditions for access
You can set a maximum duration for the TV to operate for at least one day of the week.
Note: the time and date must be set on the TV set for the KidPass function to work.
1. Select the Weekly sched. option under the KIDPASS menu and press OK to confirm.The WEEKLY
SCHEDULE
menu then appears.
ITC008-EN-2 24/03/04 13:06 Page 10