Filter
Top Products
Getting started
4
EN
Remote control TV functions
Most of your television’s functions are available via the menus that appear on the screen.The remote control supplied with
your set can be used to navigate through the menus and to configure all the general settings.The remote control and its
functions may vary depending on the model of television.The rest of this page contains the description of the most
comprehensive remote control. Optional remote control features are indicated by the symbol .
Standby / quit standby.
DVD To access DVD mode.
VCR To access VCR mode.
TV To access TV mode.
Press this button to control the television. If you do not have
this button on your remote control, it means that you can
access the TV functions directly, without pressing a button
beforehand.
light To provide information:
- it lights up when you press a button,
- it indicates the status when the remote control is being
programmed (see page 5),
- if the batteries are run down, it flashes when you press a
button.
+/- To control the volume.
This function is also available in
VCR
and
DVD
modes.
To s witch the sound off and back on again.
RETURN To r eturn to the previous menu.
PR+/PR- To change channels.
EXIT To close a menu.
MENU To access the OVERVIEW menu.
To select menu options.
To set functions, change values, enable and disable functions.
4/3 models: to select the picture format
16/9 models: to select the zoom function.
OK To confirm a selection.
Coloured buttons:
PRESETS (red button) picture preset settings
Zzz/LIST (green button) sleep timer
INFO (yellow button) status information
GUIDE (blue button) disabled in TV mode
TEXT (purple button) Teletext
The coloured buttons can also be used for operating Teletext.
0-9 To select a channel by its number. In the case of channel
numbers with two digits:
- press the two digits quickly, or
- press 0 twice to display “--”, then enter the channel number.
AV To select an appliance connected to an AV socket.
RADIO
To access Radio mode.
Important:
If the batteries in your remote control are run down, you can use the buttons on the front of your set, as they have the same functions as those
on the remote control.
ITC008-EN-2 24/03/04 13:06 Page 4