Filter
Top Products
8
Chapter 3 Operation
EN
General operation
Switching the TV set on and off
To s witch the TV set on, press the button located on the front of the set.To switch off the TV set, press this button
again.
Standby mode
Press the button on the remote control.The TV set remains powered up, but with low energy consumption.
Quitting standby mode
- press the or any numeric button on the remote control,
- press the
TV, OK or PR+/PR- buttons to switch the television on at the last channel or AV programme you were
watching,
- press the AV button to switch the television on at the last AV programme you were watching.
Volume
Volume control: use the VOL+/VOL- buttons on the front of the TV set or press the relevant buttons on the remote control
to increase or decrease the volume.
Sound mute: press the button to temporarily mute the sound. Press this button again or the VOL+ button to restore it.
Displaying status information
In TV mode, press the yellow button (INFO) on the remote control to display the number and name of the channel you are
watching, the time, the type of sound and the zoom or format type. If the KidPass function is on, the amount of time left is
displayed. If no restrictions are currently applied, 24:00 is displayed.
When you switch on the television or change channels, the number and name of the channel are displayed if you entered its
name under the ORGANISER menu.
Accessing channels
Using the numeric buttons:
- for channels 1 to 9, press the corresponding button.
- for channels 10 to 99,
- quickly enter the channel number’s two digits, or
- press the 0 button twice to display “--“, then enter the two digits.
Using the PR+/PR- buttons: scroll through the channels.Av programmes are not included in the cycle unless you use the
buttons on the front of the TV set.
Accessing AV programmes
Press the AV button to display the last selected audio-visual programmes and scan through the other audio-visual
programmes.
Zoom
In TV mode, you have the option of changing the display format and using the zoom function via the buttons.The
formats and zoom functions vary according to the screen format.
16/9 sets have the following formats and zoom functions available:
4/3 format - picture in 4x3 format
14/9 zoom - picture in 14/9 letterbox format
16/9 zoom - picture in 16/9 letterbox format
16/9 zoom up - picture in 16/9 letterbox format with subtitles
Cinerama - picture in widescreen 4x3 format
16/9 format - picture in 16/9 format
4/3 sets have two formats available:
4/3 format and 16/9 format.
When you change channels the format is not retained. However, if you used the zoom function, the setting will still apply.
A
ITC008-EN-2 24/03/04 13:06 Page 8