Filter
Top Products
6
Chapter 2 Channel set-up
EN
Initial set-up
Initial set-up involves selecting all the settings required to be able to
search for and store all the channels you can receive.
Make sure that the television is switched on and follow all the steps in
turn specified on this page.
1. When you first switch the TV set on, the INSTALLATION menu appears and the Language option is selected.
Choose which language you want the menus to appear in using the buttons.When you select a language it is
applied to the menus immediately.
2. Select the Auto. Instal. option using the button and press OK to confirm.
3. The relevant menu appears with the Standard option selected. Select a suitable standard using the buttons.
Note: the following standards are available to choose from: UK for the UK and Ireland, FR for France and Luxembourg, DK for Eastern Europe,
the Middle East and Asia,
EURO for Western Europe,Australia and New Zealand.
4. Then select the Start option using the button and press OK to start the search. During this time the message
“Running” appears next to the Start option and the Frequency and PR options appear, informing you of the
installation procedure’s progress.
If you press the EXIT button before the end of the search the channels already found are stored.
Once the search has ended the ORGANISER menu appears (see below).
Organiser
Using this menu you can change the order the channels have been
arranged in during automatic set-up, name and rename channels and
delete duplicate channels or those with poor reception quality.
Follow the help messages at the bottom of the screen and refer to a TV
programme guide to help identify the channels.
Arranging channels in order
Select the first option under Return. Display the channel number to be changed on the left using the PR+/PR- buttons.
The relevant channel appears. Use the numeric or buttons to assign a different number to it.The new channel number
appears on the right. Press OK to confirm.The new channel number then appears on the left.
Follow the same procedure for the other channels.
Deleting channels
Select the Delete option. Display the number of the channel to be deleted using the PR+/PR- or numeric buttons.The
relevant channel appears. Press the OK button for three seconds to delete the channel. Once this channel has been deleted
the number of the following channel appears.
Naming or renaming channels
Select the first option under Return. Display the number of the channel whose name you want to change using the
PR+/PR- buttons.The relevant channel appears.
Select the Name option and press the button to place the cursor on the first character. Using the buttons, select
a character from the list, which includes letters from the alphabet, numbers between 0 and 9, the characters +,. and space.
Go on to the next character or back to the previous character using the buttons and start the procedure again. Press
OK to confirm. Names can have a maximum of six characters.
Press EXIT to close the menu.
ORGANISER
Return
PR02 PR..
Name A. . . . .
Delete PR02
Start: RIGHT key
Scroll up/down: UP/DOWN keys
Validate name: OK
AUTO. INSTALLATION
Return
Standard UK...
Start Running...
Frequency 150.75 MHz
PR 05
ITC008-EN-2 24/03/04 13:06 Page 6