Filter
Top Products
2.4 Connecting up yourdigital receiver 13
In this case, you will need to connect a ca-
ble from the RF OUT socket to the antenna
connector onyour television. Toensureyour
television can also pick upexisting analogue
channels as well, you will need to connect a
cable from your television antenna to RF IN
connector.
2.4.3 Connecting to your video cassette recorder
The digitalreceiveralso canoutput video toanother appliance
such as video cassette recorder or video receiver through an
auxiliary SCART connector.
You will need to obtain a SCART cable to
use the auxiliary SCART connector. Plug
one end of the cable into the VCR socket on
the digital receiver, and the other end into
the matching socket on your video cassette
recorder or suchlike.
2.4.4 Inserting batteries in the remote control
To insert the batteries, open the battery compartment by re-
moving the lid, and then insert the batteries observing the po-
larity, which is marked on the base of the battery compart-
ment.
If the digital receiver no longer reacts properly to remote con-
trol commands, the batteries may be flat. Be sure to remove
used batteries. The manufacturer accepts no liability for dam-
age resulting from leaking batteries.
NOTE
Batteries, includingthose whichcontain noheavy metals, may
not be disposed of with household waste. Please dispose of