Filter
Top Products
6.3 Transferring receiver data 49
• Service list
• Favorite list
• Preference settings
It is possible to transfer receiver data to your digital receiver
fromanother same digitalreceiverconnecting them witha RS-
232 cable.
To transfer receiver data, perform the following steps:
1. Plug one end of a RS-232 cable (9 pin D-
sub cable) into the RS-232 port on the
digital receiver, and the other end into
the matching port on the other digital re-
ceiver.
2. Turn on both of them.
3. Select the Installation > Transfer Data to
Other IRD menu.
4. Restart the digital receiver.
NOTE
You had better memorize some important data such as video
settings before starting transfer to avoid resetting them.