Filter
Top Products
3.5 Adjusting the on-screendisplay 23
sorship option to 15 (age). Setting it to No block restricts no
program; on the other hand, setting it to Total block restricts
every program.
NOTE
If aprogramdoes nothave anyrating information,your rating
setting will not take effect.
If anyone is trying to watch a program that is out of the ba-
sis rating, the person has to enter the personal identification
number to override.
To change the number, select the Change PIN Code menu;
then an input box appears. You have to enter a desired num-
ber twice for confirmation.
You can alsorestrict uses ofsome menus. Selecting the Access
Control menu displays a list of menus that you can lock. If the
Time Setting item is set to Locked, you have to enter the per-
sonal identification number to access the Time Setting menu.
If you enter a wrong number, you cannot use the menu. To
release a shut item, set it to Unlocked.
3.5 Adjusting the on-screen display
You can adjust the transparency level of the on-screen display.
Select theSystem Settingmenu andset theOSD Transparency
option as you desire. Its available range is 0 to 50 percent.
You can adjust the display time of the information box. Refer
the information box to § 5.2.2. To adjustits display time, select
the System Setting menu and set the Info Box Display Time
option as you desire. Its available range is 1 to 30 seconds. If
you setthis option to No Info Box, the information boxwill not
displayed when you switch services. However, pressing the
button displays the information box. If you set this option
to Never Hide, the information box will always be displayed.