Filter
Top Products
4.1 Searching broadcasting services 35
6.
Specify the packet identifiers of your desired service at
the PID option with the numeric buttons. A packet iden-
tifier is used to verify audio and video streams.
Searching every service of SMATV system
To search every service of a SMATV system, if the digital re-
ceiver is connected to it, perform the following steps:
1.
Choose your desired satellite at the Satellite Name op-
tion.
2. Set the Search Mode option to SMATV.
3.
Choose your desired transponder at the Frequency op-
tion or enter it with the numeric buttons.
4.
Enter the symbol rate of your desired transponder to the
Symbol Rate option with the numeric buttons.
5.
Set the Polarization option to the polarization of your
desired transponder.
You can search pay services as well as free services as follows:
•
To searchonly free services, set theFTA/Scrambledoption
to FTA only.
• To search only pay services, set it to CAS only.
•
To search both free services and pay services, set it to FTA
+ CAS.
To start service search, select the Start Search item; then a list
box appears, in which found services will be listed. When it
has completed, press the
✄
✂
✁
OK
button to save found services.
To stop at any time or to exit without saving, press the
✄
✂
✁
EXIT
button.