Topfield TF 6000 FE Satellite TV System User Manual


 
2.2 Safety precautions 7
The wall outlet should be near the equipment. Do not
run an extension lead to the unit.
Do not expose the digital receiver to any moisture. The
digital receiver is designed for use indoors only. Use dry
cloth when cleaning the digital receiver.
Place the digital receiver on a firm and level surface.
Do not place the digital receiver close to heat emitting
units or in direct sunlight, as this will impair cooling.
Do not lay any objects such as magazines on the digi-
tal receiver. When placed in a cabinet, make sure there
is a minimum space of 10 centimetres around it. For
the physical specification of the digital receiver, refer to
Table 2.2.
Protect the power cord from being walked on or pinched.
If the wires are exposed or the cord is damaged, do not
use the digital receiver and get the cord replaced.
Never open the digital receiver casing under any circum-
stances. The warranty will be void.
Refer all servicing to a qualified service technician.
Table 2.1: Power specifications
Input voltage 90 to 250VAC, 50/60Hz
Power consumption 24W at maximum in operation
9W in standby
Table 2.2: Physical specifications
Size 260× 46× 190mm
Weight 1.2kg
Operating temperature 0 to 45°C
Storage relative humidity 5 to 95%