Topfield TF 6000 FE Satellite TV System User Manual


 
30 Service Search
NOTE
You may get transponder information from a satellite magazine
or website such as
http://www.satcodx.com
or
http://www.
lyngsat.com.
Searching one service of a transponder
To search one service of a transponder, perform the following
steps:
1.
Choose your desired satellite at the Satellite Name op-
tion.
2. Set the Search Mode option to Advanced.
3.
Choose your desired transponder at the Frequency op-
tion or enter it with the numeric buttons.
4.
Enter the symbol rate of your desired transponder to the
Symbol Rate option with the numeric buttons.
5.
Set the Polarization option to the polarization of your
desired transponder.
6.
Specify the packet identifiers of your desired service at
the PID option with the numeric buttons. A packet iden-
tifier is used to verify audio and video streams.
Searching every service of SMATV system
To search every service of a SMATV system, if the digital re-
ceiver is connected to it, perform the following steps:
1.
Choose your desired satellite at the Satellite Name op-
tion.
2. Set the Search Mode option to SMATV.
3.
Choose your desired transponder at the Frequency op-
tion or enter it with the numeric buttons.
4.
Enter the symbol rate of your desired transponder to the
Symbol Rate option with the numeric buttons.