Filter
Top Products
2.5 Switching on for the first time 17
2.5.1 Inserting batteries in the remote control
To insert the batteries, open the battery compartment by remov-
ing the lid, and then insert the batteries observing the polarity,
which is marked on the base of the battery compartment.
If the digital receiver no longer reacts properly to remote con-
trol commands, the batteries may be flat. Be sure to remove
used batteries. The manufacturer accepts no liability for the
damage resulting from leaking batteries.
NOTE
Batteries, including those which contain no heavy metals, may
not be disposed of with household waste. Please dispose of
used batteries in an environmentally sound manner. Find out
about the legal regulations which apply in your area.
2.5.2 Powering on and checking picture
Now, press the button in top left corner on the remote con-
trol. Ifyou do not see a picture, try pressing the
✄
✂
✁
V.Format
button
on the remote control. If after several tries you still get no pic-
ture, check that the television is set to the correct input. If the
picture is good, you can skip to
§
4.1 to search for the available
television and radio services. Otherwise, you may need to
temporarily connect the composite video connector (VIDEO)
to your television set so that you can see the on-screen menus
in order to configure the video settings.