Filter
Top Products
English - 11 -
Analogue manual tuning
The television can be tuned-in manually using INSTALL. For example: if the television cannot be connected to a media
recorder/decoder with a SCART lead or to tune-in a station on another
System.
Manual tuning
To allocate a programme position on the television for a
decoder and media recorder: turn the decoder on, insert a
pre-recorded film into the media recorder and press PLAY,
then manually tune.
Press MENU and using the Up or Down button select
INSTALL menu. By pressing Up or Down button, select
Programming option and press Right button.
Using the Down button select Programme and key in
the programme position to be tuned with the number
buttons, we suggest
Programme 0 for a media recorder.
PROGRAMMING
Programme 4
Band S
Back: Menu Exit: Exit
Channel 30
Standard BG
Colour System PAL
Use the Down button to select Search then press the
Left or Right button to search. The television will begin
searching for channels.
Each signal will show on the television, if it is not your
media recorder press the Left or Right button to restart
the search.
When your media recorder signal is found, save the
selection by pressing the Down button until
Store is
highlighted, then press the Left/Right or OK button to
save.
Repeat for each
programme position to be tuned then
press
EXIT to finish.
Note: Press to select between TV or DTV.