Filter
Top Products
Chapter 6: Basic features
35
Using Channel Return
You can switch between two channels without
entering a channel number each time. This feature
also works for external inputs.
1無
Select the first channel you want to view.
2無
Select a second channel using the Channel Number
buttons (and the dash ( ) button if needed).
3無
Each time you press , the TV switches back
and forth between the last two channels that were
tuned.
Using SurfLock
™
The SurfLock
™
feature temporarily memorizes one
channel to the button so it can be quickly
returned to from any other channel. This feature also
works for external inputs.
To memorize a channel to the button:
1無
Tune the channel you want to program to the
button.
2無
Press and hold for about 2 seconds until the
message “Memorized” appears. The channel has
been programmed to the button.
3無
You can then change channels repeatedly, and
when you press , the memorized channel will
be tuned.
After pressing and then changing channels
again, the memory is cleared and the button functions
as Channel Return.
Selecting the video input to view
To select the video input to view:
1無
Press on the remote control or TV control
panel.
2無
Change the input:
•Press 0–6 (for 24”), 0-7 (for 32” / 40”).
•
Repeatedly press
p or q
. Press .
•
Repeatedly press .
HDMI CEC
(for 24”) (for 32” / 40”)
Note:
•
You can label the video input sources according
to the specific devices you have connected to
the TV ( “Labeling video inputs” on page 31).
•
You can skip sources ( “Skipping video
inputs” on page 30).
•
Inputs that are set to be skipped will not be
available and will be skipped when selecting
inputs by repeatedly pressing or
p
or
q
.
•
You can select inputs that are set to be skipped
using the number buttons.
•
If one or more HDMI
®
CEC devices are
connected to an HDMI input, the icon appears
in the input selector. In this case, the label (
page 31) will not appear on the input selector.
•
When the Auto Input feature is set, you
can select a video input source with the
remote control by pressing and holding the
corresponding MODE SELECT button for 2
seconds ( page 32).
To select a HDMI
®
CEC device:
1無
Press
p or q
to select an HDMI input.
2無
Press u. The list of HDMI
®
CEC devices for that
input appears.
3無
If the input has multiple HDM
I
®
CEC devices, use
p or q
to select a device.
4無
Press .