Filter
Top Products
Chapter 7: Picture and sound controls
54
Using the Dolby
®
Digital Dynamic
Range Control feature
You can further compress Dolby Digital and Dolby
Digital Plus dynamic range so you can switch from
digital to analog broadcasts at the same dynamic range.
1無
> Settings > SOUND > Dynamic Range
Control.
2無
Press
t or u to select On.
Note:
•
This feature is available when Dolby Digital
or Dolby Digital Plus is input to the TV in the
following situations:
-When tuned to a digital RF channel.
-When an HDMI input is used.
-When DLNA Certified products or widgets
are used.
•
This feature is automatically set to Off when
Dynamic Volume (Audyssey Dynamic
Volume
®
) is set to Low or High.
•
This feature will also affect Digital Audio
Output when the optical audio output format
is set to PCM.
Using Audyssey Dynamic Volume
®
This feature provides a consistent sound volume
between television programs, commercials, and
between the loud and soft passages of movies.
1無
> Settings > SOUND > Dynamic Volume.
2無
Press
t or u to select Low, High, or Off.
Note:
•
If Dynamic Range Control is set to On, this
feature will be not available.
•
This feature does not affect the audio
signal output from the DIGITAL AUDIO OUT
terminal.
Using advanced sound features
Using surround sound
Voice Enhancement and Dynamic Bass Boost help
to create a thrilling surround sound experience with
deep, rich bass from stereo sound sources. Your TV’s
audio will sound fuller, richer, and wider.
Note: Surround features are only available
for Stereo mode ( “Selecting stereo/SAP
broadcasts” on page 53).
1無
> Settings > SOUND > Advanced Sound
Settings > .
2無
Press
p or q
highlight the feature to adjust. Press
t or u to adjust the item.
Mode Description
Voice
Enhancement
Turns the vocal emphasis effect
On or Off.
Dynamic Bass
Boost
Selects a bass expansion level
(Off, Low, or High).