Filter
Top Products
Chapter 8: Advanced features
56
Setting up the Network
You can select the Network Type.
1無
> Settings > PREFERENCES > Network
Setup > .
(Another: > Network > Network Setup > .)
2無
Press
p or q
to highlight Network Type.
3無
Press t or u to select Wired or Wireless.
4無
If you select Wired, see “Advanced Network
Setup” ( page 58).
If you select Wireless, see the next section.
Wireless Setup
Note:
•
Continued AP (Access Point) connection is
not guaranteed. Connection may be lost while
watching TV.
There are 3 methods for wireless setup:
•
Easy Setup (WPS)
If the AP supports WPS, this can be used.
−WPS is a standard designed to simplify the
connection of wireless LAN equipment and
the setup of network security features.
•
Assisted Setup (setup using the AP’s notification
information)
Network Name, Authentication, and Encryption are
decided based on information from the AP. You need
to manually set the Security Key.
•
Manual Setup (to input all settings)
Easy Setup using PBC (Push Button Configuration)
1無
> Settings > PREFERENCES > Network Setup
> .
2無
Press
p or q
to select Wireless Setup. Press .
3無
Press
p or q
to select Easy Setup. Press .
4無
Press t or u to select PBC.
5無
Press
q
to select Start Scan. Press .
6無
Following the onscreen instructions, push the
appropriate button on your AP.
7無
When a screen reporting that the setup has
succeeded appears, press .
To cancel searching for the AP:
Press while searching for the AP. A message
will appear. Press t or u to select Yes. Press .
Easy Setup using a PIN (Personal Identification
Number)
1無
> Settings > PREFERENCES > Network Setup
> .
2無
Press
p or q
to select Wireless Setup. Press .
3無
Press
p or q
to select Easy Setup. Press .
4無
Press t or u to select PIN.
5無
Press
q
to select Start Scan. Press .
6無
Scan screen appears. Enter the PIN displayed on
this screen into your PC or AP.
7無
Press
p or q
to select the desired AP. Press .
Note: Check the MAC address on the label
or in the manual of the AP and select an AP.
8無
When a screen reporting that the setup has
succeeded appears, press .
To cancel searching for the AP:
Press while searching for the AP. A message
will appear. Press t or u to select Yes. Press .
Assisted Setup
1無
> Settings > PREFERENCES > Network Setup
> .
2無
Press
p or q
to select Wireless Setup. Press .
3無
Press
p or q
to select Assisted Setup. Press .
4無
Press
p or q
to select the desired AP. Press .
Note: Check the MAC address on the label
or in the manual of the AP and select an AP.
5無
Select Security Key. Press . The Software
Keyboard appears.
6無
Input the Security Key using the Software
Keyboard ( page 59). To save your settings,
press the BLUE button.
Note: The Security Key must adhere to these
conditions:
− TKIP/AES: 8-63 ASCII or 64 Hex characters
− WEP: 5 or 13 ASCII or 10 or 26 Hex characters
7無
Select Done. Press .
Note: Settings are not saved if is pressed
before Done is selected.