Filter
Top Products
27
Appendix
Using the TV’s
Features
Setting up
your TV
Using the
Remote Control
Connecting
your TV
Welcome to
Toshiba
Important
Safeguards
To clear your favorite channels:
1. Select a channel you want to clear.
2. Press MENU, then press or to display the OPTION menu.
3. Press ▲ or ▼ to highlight FAVORITE CH.
4. Press or to display the FAVORITE CH menu. SET/CLEAR will
be highlighted.
5. Press
or to highlight CLEAR.
6. Press ENTER until “0” replaces the channel number you want to
erase.
7. Press EXIT to return to normal viewing.
8. Repeat steps 1-6 for the other channels.
Using the LOCKS menu
The V-Chip feature is available only for the U.S. V-Chip system. The
Canadian V-Chip system is not supported.
You can prevent others from viewing certain programs or channels by
blocking them using the V-Chip feature.
Selecting a password
Before you can block programs and channels, you must select a
password. The password you select prevents others from changing the
rating limits you set.
To select your password and access the LOCKS menu:
1. Press MENU, then press or to highlight the LOCKS menu.
2. Press ▲ or ▼ to display the password entering mode.
3. Use the Channel Number buttons (0-9) to enter your password.
If you are accessing the LOCKS menu for the first time, select a
four-digit number to be your password. Press ENTER.
4. Enter the password again to confirm it, and then press ENTER.
The LOCKS menu appears.
Menu/
Enter
Exit
Menu/
Enter
FAVORITE CH :CH 002
SET / CLEAR
SETUP CH 002 0 0 0
0 0 0 0
TV CABLE 0 0 0 0
:ADJUST CLEAR:ENTER
END:EXIT
Note:
The password you programmed is also used in
the LOCKS menu; see pages 29-31.
Channel
Numbers
Using the TV’s
Features
3R40321A/E P27-33 9/7/04, 15:0827