Filter
Top Products
37
Appendix
Using the TV’s
Features
Setting up
your TV
Using the
Remote Control
Connecting
your TV
Welcome to
Toshiba
Important
Safeguards
If the signal does not include aspect information, the picture size you
selected on pages 34 and 35 is displayed.
To turn on the ASPECT feature:
1. Press MENU, and then press
or until the SETUP menu appears.
2. Press ▲ or ▼ to highlight ASPECT, and then press
or to select
ON.
Selecting the cinema mode
When you view a DVD movie (3:2 pulldown processed) from a DVD
player connected to the ColorStream (component video) inputs on the
TV, smoother and more natural motion can be obtained by setting the
CINEMA MODE to FILM.
To set the CINEMA MODE to FILM:
1. Press MENU, and then press
or
until the SETUP menu appears.
2. Press ▲ or ▼ to highlight CINEMA
MODE, and then press
or to
select FILM.
To set the CINEMA MODE to VIDEO (off):
Press or to select VIDEO in step 2 above.
Selecting the display format (for 480p signals
only)
This feature converts a 480p input signal to 540p or 1080i.
To select the display format:
1. Press MENU, and then press
or until the PICTURE menu
appears.
2. Press ▲ or ▼ to highlight DISPLAY FORMAT.
3. Press
or to select 540p or 1080i.
PICTURE
COLOR
TEMPERATURE
DISPLAY FORMAT
SVM
RESET
:SELECT :ADJUST
COOL
540p / 1080i
HIGH
Menu
Using the ASPECT feature
When the ASPECT feature is set to ON and the TV receives a
480i signal, the picture size is automatically selected (as described in
the following table).
Aspect ratio of signal source
4:3 Normal
16:9 Full
4:3 Letter box
Not defined
Automatic aspect size
(automatically selected
when ASPECT is ON)
Natural
Full
TheaterWide 2
User-set mode
Notes:
• The DISPLAY FORMAT feature is available
only for 480p input. 1080i is always output
when a signal other than 480p is input.
• If you notice flickering in a 480p image, try
setting the DISPLAY FORMAT to 540p.
Using the TV’s
Features
3R40321A/E P34-40 9/7/04, 15:0837