Filter
Top Products
30
Locking the video inputs
With the VIDEO LOCK feature, you can lock out the input sources
(VIDEO1, VIDEO2, VIDEO3, COLORSTREAM HD1, COLORSTREAM
HD2, HDMI1, HDMI2) and channels 3 and 4.
You will not be able to select the input sources with the INPUT button
or Channel buttons unless you clear the setting.
To set up the video lock:
1. Press MENU, then press
or to display the LOCKS menu.
2. Press ▲ or ▼ to display the password entering mode.
3. Use the Channel Number buttons (0-9) to enter your password,
then press ENTER. The LOCKS menu appears.
4. Press ▲ or ▼ to highlight VIDEO LOCK.
5. Press
or to select:
• OFF: Unlocks all video input sources.
•
VIDEO: Locks VIDEO1, VIDEO2,
VIDEO3 and COLORSTREAM
HD1, COLORSTREAM HD2,
HDMI1, HDMI2
.
• VIDEO +: Locks VIDEO1,
VIDEO2, VIDEO3,
COLORSTREAM HD1,
COLORSTREAM HD2, HDMI1,
HDMI2, channel 3 and channel 4. This option should be used if
you use the antenna terminal to play a video tape.
7. Press EXIT to return to normal viewing.
To unlock video input:
1. Press MENU, then press
or to display the LOCKS menu.
2. Press ▲ or ▼ to display the password entering mode.
3. Use the Channel Number buttons (0-9) to enter your password,
then press ENTER. The LOCKS menu appears.
4. Press ▲ or ▼ to highlight VIDEO LOCK and press or to
highlight OFF.
5. Press EXIT to return to normal viewing.
Setting the GameTimer
TM
With the
GameTimer
TM
feature, you can automatically activate the
VIDEO LOCK feature (VIDEO setting)
to set a time limit for playing a
video game (30, 60, 90 or 120 minutes).
To set up the GameTimer:
1. Press MENU, then press
or to display the LOCKS menu.
2. Press ▲ or ▼ to display the password entering mode.
3. Use the Channel Number buttons (0-9) to enter your password,
then press ENTER. The LOCKS menu appears.
4. Press ▲ or ▼ to highlight GAME TIMER.
5. Press
or to select a time limit (30 minutes, 60 minutes, 90
minutes, 120 minutes or OFF).
6. Press EXIT to return to normal viewing. After the GameTimer is
programmed, the display will
appear briefly every ten minutes to
remind you that the GameTimer
is
operating.
When the programmed time is
reached, the TV will change
channels automatically and enter
VIDEO LOCK mode.
Note:
After programming VIDEO LOCK, change
channels or activate the INPUT key before
turning off the television.
Menu/
Enter
Exit
Channel
Numbers
Note:
To deactivate the GameTimer, set the VIDEO
LOCK to OFF (see “Locking the video inputs”
above).
Using the TV’s
Features
Input
3R40321A/E P27-33 9/7/04, 15:0830