Filter
Top Products
32
Selecting the video input source
Press INPUT to view a signal from another device connected to your
TV, such as a VCR or DVD player. You can select ANT, VIDEO 1,
VIDEO 2, VIDEO 3, ColorStream HD1, ColorStream HD2, HDMI1, or
HDMI2 depending on which input jacks you used to connect your
devices (see “Connecting your TV” on page 7).
Labeling the video input sources
The video label feature allows you to label each input source for your
TV from the following preset list of labels:
– : Uses the default label name
VCR : Video cassette recorder
DVD : DVD video
DTV : Digital TV set-top box
SAT : Satellite box
CBL : Cable box
To label the video input sources:
1. Press MENU, and then press
or
to display the OPTION menu.
2. Press ▲ or ▼ to highlight VIDEO
LABEL.
3. Press
to display the VIDEO
LABEL menu.
4. Press ▲ or ▼ to highlight the video
source you want to label.
5. Press or to select the desired
label for that input source.
6. Press EXIT to return to normal
viewing.
Pressing INPUT on the remote
control displays the current signal
source (press INPUT again or 0-
7 to change)
Note:
When ColorStream HD 1, HD 2, HDMI1
, or
HDMI2 is selected, the video OUT jack does
not output a signal. To receive a video OUT
signal, you must use a standard video or S-
video connection instead.
Please note the following regarding
the HDMI source selection:
This TV is not intended for connection
to and should not be used with a PC
(personal computer). See “Connecting
an HDMI or a DVI device to the HDMI
input” on page 14 for details.
Menu
Exit
Using the TV’s
Features
Input
3R40321A/E P27-33 9/7/04, 15:0832