Filter
Top Products
English - 14 -
APS (Automatic Programming System)
When the APS feature is selected all channels and
settings will be lost, the television will return to factory
settings and then re-tune.
Press • MENU and using the Left or Right button
select Program Table tab.
The • Program screen will appear on the screen.
Press the BLUE button to start APS.
Press• the Left or Right button to set the country.
Press the • BLUE button to cancel APS or the RED
or OK button to start.
You must allow the television to complete the
search.
When the search is complete the television will •
automatically select programme position 1. This may
not be a clear picture or the signal may be weak, so
the station order can be changed using program
table which will appear on the screen.
Press • BACK to fi nish.
Sorting Programme Positions - Analogue
Channels may be moved and saved to the position •
of your choice.
Select Programme Table tab from the main analogue •
TV menu.
With the list of channels showing, use navigation •
buttons to highlight the channel you want to move
and press GREEN button. The selected channel will
be highlighted with a frame.
Use navigation buttons move through the list to your •
preferred position. As you do so, the other channels
will move to make room.
When fi nished, press • GREEN button to save your
move.
Analogue APS and Programme Sorting
Before switching on the television put your decoder and media recorder to Standby if they are connected
and ensure the aerial is connected to your television.
00_MB45M_[GB]_3910UK_IDTV_SILVER8_32740W_(IB_INTERNET)_10068433.indd 1400_MB45M_[GB]_3910UK_IDTV_SILVER8_32740W_(IB_INTERNET)_10068433.indd 14 30.03.2011 14:31:3230.03.2011 14:31:32