Toshiba 32BV500B Flat Panel Television User Manual


 
English - 7 -
Connecting External Equipment
Before connecting any external equipment, turn off the On/Off switch and remove the mains plug from the
wall socket.
Aerial cable:...........................................................
Connect the aerial to the socket on the rear of the
television.
SCART lead:..........................................................
If you use a decoder* or a media recorder, it is essential that
the scart cable is connected to the television.
Before running rst time installation, any connected devices
to standy mode.
The phono sockets located on the side of the TV will accept
L and R audio signals.
The Coaxial Audio Output socket enables the connection of
a suitable surround sound system.
NOTE: This output is always active.
HDMI® (High-De nition Multimedia Interface) is for using
with a DVD decoder or other equipment with digital audio and
video output. It is designed for best performance with 1080i
and 1080p high-de nition video signals but will also accept
and display VGA, 480i, 480p, 576i, 576p and 720p signals.
PC format signals will also be displayed.
NOTE: Although this television is able to connect to HDMI
equipment, it is possible that some equipment may not
operate correctly.
A wide variety of external equipment can be connected to the
television; therefore, the relevant owner’s manuals for all addi-
tional equipment must be referred to for exact instructions.
If the television automatically switches over to monitor external
equipment, return to normal television by pressing the desired
programme position button. To recall external equipment,
press SOURCE button to switch between sources.
IMPORTANT: Please do not connect a device to PC
socket while using YPbPr input.
SPDIF
SCART
VGA
Coax.OUT
HDMI 2
HDMI 1
HDMI Input
Sockets
Coaxial Digital
Audio Output
PC VGA
Input
Scart
Socket
Aerial
Input
TV
* a decoder
could be Digital
Satellite, Free to
Air or any other
compatible
decoder.
decoder*
Cable Holder Input
COMMON INTERFACE
The Common Interface is
for a Conditional Access
Module (CAM).
Component Video
Inputs (YPbPr)
USB Input
Side Video Input
PC/YPbPr/AV
Audio Inputs
Headphone
On/Off Switch
00_MB45M_[GB]_3910UK_IDTV_SILVER8_32740W_(IB_INTERNET)_10068433.indd 700_MB45M_[GB]_3910UK_IDTV_SILVER8_32740W_(IB_INTERNET)_10068433.indd 7 30.03.2011 14:31:2330.03.2011 14:31:23