Filter
Top Products
81
Setting up your TV
Selecting the PIN code
Using the Dolby
®
Digital Dynamic Range Control feature
You can further compress Dolby
®
Digital dynamic range, allowing
you to switch from digital to analog broadcasts at the same dynamic
range.
To use the Dolby
®
Digital Dynamic Range Control:
1 Press the MENU button and open the Sound menu.
2 Highlight Dynamic Range Control, and then press the ENTER
button.
3 Press the ▲/▼(arrow) buttons to select On, and then press the
ENTER button.
v This feature is available when the TV is tuned to a digital RF
channel or an HDMI
TM
input with the Dolby
®
Digital signal.
v The Dolby
®
Digital Dynamic Range Control will function in
relation to Optical Output Format (PCM mode).
Selecting the PIN code
A PIN code is necessary for some menus.
v The Parental Control and Locks menu is grayed out if no PIN has
been set.
Enter a new PIN code
1 Press the MENU button and open the Options menu.
2 Highlight Parental PIN Setup, and then press the ENTER button.
3 Use the number buttons to enter a 4-digit number. Conrm the code.
Forgotten PIN code
While the PIN code entering screen is displayed, press the INFO
button four times within ve seconds. The PIN code will be cleared
and you can enter a new PIN code.
Changing or deleting your PIN code
1 Press the MENU button and open the Options menu.
2 Highlight Parental PIN Setup, and then press the ENTER button.
3 Use the number button to enter a 4-digit number.