Filter
Top Products
20
Basic operation
Toshiba 32/37WL58AET (E)
Picture quality adjustment
Basic operation
Picture quality adjustment
To select the picture mode:
You can select the picture quality instantly among three preset
modes and one user-set mode.
•Press the button to select
the desired picture quality.
Dynamic, Standard, Mild and
Memory (user-set) can be selected
cyclically.
Note:
In the PC input mode (see page 29), this mode is not available.
To adjust the basic picture quality:
Press the MENU button, then
press the or button to
display the PICTURE menu.
Press the or button to
select the Picture settings
menu, then press the OK
button.
Press the or button to
select Contrast, Brightness,
Color, Tint or Sharpness, then
press the or button to
adjust the level.
Notes:
• The Tint may only be adjusted on a tape
which has been recorded and played
back on an NTSC VCR.
• In the PC input mode (see page 29),
Color, Tint and Sharpness modes are
not available.
Mode Picture quality
Dynamic bright and dynamic picture
Standard standard picture
Mild soft picture
Memory the picture quality you set
Selection Pressing
Back light darker lighter
Contrast lower higher
Brightness darker lighter
Color paler deeper
Tint reddish greenish
Sharpness softer sharper
DVD
MENU
P
P
21 3
54 6
87 9
VCR
TV
DVD
0
OK
CALL
MENU
EXIT
Dynamic
Contrast 100
Tint
Color
Back light
MENU
Back Watch TV
EXIT
100
50
0
0
Sharpness
Contrast
100
Picture settings
1/2
Brightness
50
#01E18-28_32/37WL58AET 8/5/05, 3:49 PM20
Black