Filter
Top Products
7) VESAMounting Pattern
40" 200x200 mm M6
46" 400x200 mm M8
55" 400x200 mm M8
(mlit in ram)
RemovingthePedestal Stand
1) Carefullylay the front of the unit face down on a
flat, cushioned surface such as aquilt or blanket.
Leavethe stand protruding overthe edgeof the
surface.
Note; Extreme care should always be used
when removing the pedestal stand to avoid
damage to the LCD panel.
2) Remove thefour screws shown in the right
diagram. This will allow removal of the pedestal
stand.
3) Onceyou haveremovedall four screws, holding
the pedestalstand in place, remove the pedestal
stand from the TV.
40" TV
VESA Mounting Pattern
Four screws J_qL! 2
Hook
Sturdy strap
(as short as possible)
46" TV
VESA Mounting Pattern
Four screws _L _2___J
Sturdy strap
55" TV (as short as possible)
VESA Mounting Pattern
Four screws
Hook
Sturdy strap
(as short as possible)
CAUTION:Always placetheTV onthe floor orasturdy,
level, stable surface thatcan support the weight of
the unit. Tosecurethe TV,useasturdy strap from
the hook(s) on the rear of the TVto awall stud, pillar,
or other immovable structure. Makesure thestrap is
tight, secure, andparallelto thefloor.
6
4046 55G_00U EN-ASindb @ 2010/3/16 iv@ 05:48:11