Toshiba 40G30U Flat Panel Television User Manual


 
To turn on the auto aspect ratio feature:
MENU
1 Press O and open the Picturemenu.
2 Highlight TheaterSettings and press @.
3 [n the AUtO Aspect Ratio field, select 0u.
4. To save the new settings, highlight [}one and press
@. To revert to the factory defaults, highlight
Reset and press @.
To turn off the auto aspect ratio feature:
Select 0If in step 3 above.
Usingthe FREEZEfeature
To use the FREEZE feature:
FREEZE
1 When viewing the TV, press C) to make the
picture a still picture.
FREEZE
To return to the moving picture, press ©
again (or any other button).
Note:/f the TV is left in FREEZE mode for
more than 15 minutes, the FREEZE mode
will automatically be released and the TV will
return to moving picture.
Using the FREEZE function for any purpose
other than your private viewing may be
prohibited under the Copyright Laws of the
United States and other countries, and may
subject you to civil and criminal liability.
Adjusting the picture
Selectingthe picturemode
You can select your desired picture settil!gs from four
different modes, as described below.
To select the picture mode using the menu
system:
MENU
Press O and open the Picturememt.
Highlight M0deaim press @.
3 Press A or 'V' to select the picture mode you
prefer aim press @.
Bright and dynamic picture (factory
Sports setting)
Standard Standard picture settings (factory
setting)
Lower contrast for darkened room
Movie
(factory setting)
PC Designed for viewing of PC tables
and documents
Preference Your personal preferences
Note: PC mode is available for HDMI and PC
inputs only (grayed out for other input sources).
42
(c'o*Tti*7*wd)
40_46 55G_00U EN-ASindb 42 2010/_/16 iv@ 05:44:00