Toshiba 40L1400U Flat Panel Television User Manual


 
31
Connecting Your TV
Connecting a digital audio system
The TV’s Digital Audio Out terminal outputs a Dolby
®
Digital or 2-channel down-mixed PCM (pulse-code modulation)
signal for use with an external Dolby
®
Digital decoder or other
external audio system with optical audio input.
You will need an optical audio cable (Use an optical audio cable
that has the larger “TosLink
TM
” connector and not the smaller
“mini-optical” connector.)
(Sample Illustration) 32/40/50L1400U—Connecting a digital audio
system
To control the audio:
1 Turn on the TV and the digital audio device.
2 Press the MENU button on the remote control and open the
Sound menu.
3 Press the ▲/▼(arrow) buttons to select Digital Audio Output
and then press the ENTER button.
4 Press the ◄/► (arrow) buttons to select either Auto or PCM,
depending on your device.
Some audio systems may not be compatible with Dolby
®
Digital
bitstream signal.Older audio systems that are not compatible with
standard optical out signals may not work properly, creating a high
noise level that may damage speakers or headphones. THIS
DAMAGE IS NOT COVERED BY YOUR WARRANTY. The DIGITAL
AUDIO OUT terminal may not output some digital audio sources
because of copy restrictions.
vThe Dolby
®
Digital format is available in the following situations:
- When tuned to a digital RF channel
- When an HDMI
®
input is used
Digital decoder or
other digital audio system
TV back panel