Filter
Top Products
90
Setting up your TV
Using the HDMI® settings feature
Item: Description:
Amplifier Control If Amplifier Control is set to On, you can adjust the sound volume or turn
off the sound using the remote control.
Initial Speaker Setting From this item, you can set your audio output preference to the TV
speakers or the audio receiver speakers. When this item is set to
Receiver, the TV remote can be used to adjust or mute the volume of the
audio. This item will be grayed out when Amplifier Control is set to Off.
When you turn on the Audio Receiver, change its input source or
adjust the sound volume, the sound will be output from the audio
receiver’s speakers even if TV Speakers has been selected. Turn the
TV off and on again to output the sound from the TV speakers.
Setting up HDMI
®
CEC
To set the HDMI
®
CEC Setup:
1 From the Options menu, highlight HDMI CEC Control
Setup and press the ENTER button.
2 Highlight Enable HDMI CEC Control, and then press the
ENTER button.
3 Select On, and then press the ENTER button.
If you select Enable HDMI CEC Control Off, the other items will be
grayed out.
4 Press the ▲/▼(arrow) buttons to highlight the HDMI
®
CEC
Setup item you want to use, and press the ENTER button,
follow by ▲/▼(arrow) buttons.
v TV Auto Power: On/Off
v Auto Standby: On/Off
v Amplier Control: On/Off
v Initial Speaker Setting: TV/ Receive
Using the HDMI
®
settings feature
HDMI
®
1(or 2) RGB Range
You can select RGB range of HDMI inputs from the following
modes, as described below: