Toshiba 40L1400U Flat Panel Television User Manual


 
7
7)
VESA Mounting Pattern
TV Size Hole Pattern (HxV) Screw Size
32” 200mm x 200mm M6
40” 200mm x 200mm M6
50” 400mm x 200mm M8
Removing the Pedestal Stand
1)
Carefully lay the front of the unit face down on a at,
cushioned surface such as a quilt or blanket. Leave
the stand protruding over the edge of the surface.
Note: Extreme care should always be used when
removing the pedestal stand to avoid damage to
the LCD panel.
2)
Remove the stand screws shown in the diagram
below. This will allow removal of the pedestal stand.
3)
Once you have removed the screws holding the
pedestal stand in place, remove the pedestal stand
from the TV.
CAUTION: Always place the TV on the oor or a
sturdy, level, stable surface that can support the
weight of the unit. To secure the TV, use a sturdy strap
from the hook(s) on the rear of the TV to a wall stud,
pillar, or other immovable structure. Make sure the
strap is tight, secure, and parallel to the oor.
Two stand screws
VESA Mounting Pattern
32” TV.
Hook Sturdy strap
(as short as possible)
(Sample Illustration)
VESA Mounting Pattern
Hook Sturdy strap
(as short as possible)
Two stand screws
40” TV.
(Sample Illustration)
VESA Mounting Pattern
Hook Sturdy strap
(as short as possible)
Two stand screws
50” TV.
(Sample Illustration)