Filter
Top Products
16
Getting started
Watching TV programmes
Viewing Digital programmes - digital only -
After you have tuned the TV, you have several ways to
navigate through all programmes:
•Press the Number buttons (a channel number has 4-digits)
and you may omit the leading zeroes, which will be
appended automatically; (Please note that if you have
channels with different frequencies but the same channel
number, the TV will always tune to the first channel that has
been stored into the channel database. To view the other
duplicating channels, you can select the channels from the
Navi
gation List (see below) or use the PU / P u buttons.)
•Press PU / P u to view the previous and next programme.
The channels are arranged in ascending order according to
the channel number.
• Press twice to display Favorite channel list and press
V or U to select a programme, then press Q to view the
favorite programme. Alternatively activating the Favorite
Mode, then press P U / P u to select channels in Favorite
channel list. See page 31 for more details.
Selecting channel from Navigation List
- digital only -
1 When viewing in Digital TV, press to display the
Navigation List.
2 Press V, U, Y and Z to select previewed programme,
then press Q.
3 Press P to exit the menu and watch the previewed
channel.
4 Press twice to display Favorite channel list.
Changing the programme position - analog only -
1 Enter the desired programme position number using the
Number buttons on the remote control.
For programme positions below 10, use 0 and the required
number e.g., for programme position 1.
2 You can also change the programme position by using
PU or P u.
The programme position will be displayed on the screen
with the Mono/Stereo/Dual audio status.
Note:
The programme position selection change between different
format channels takes several seconds.
Switching between two programme
positions
You can switch two programme positions without entering
actual position number each time.
1 Select the first programme position you want to view.
2 Select the second programme position with the Number
buttons (0-9).
3 Press :. The previous channel will be displayed.
Each time you press :, the TV will switch back and forth
between the two programme positions.
Selecting the menu language - analog only -
Choose from 9 different languages (English, Chinese (CS),
Malay, Thai, Vietnamese, Russian, Arabic, Persian or French)
for the On-Screen-Display.
1 Press M, then press Y or Z to display SET UP menu.
2 Press V or U to select Language.
3 Press Y or Z to select the desired language.
Displaying the on-screen information
- analog only -
1 Press k to display the following on-screen information.
The information will disappear in 6 seconds.
• Programme position or external input mode selected
• Programme skip on/off information
• Label (if set)
• Mono/Stereo/Dual audio status
2 To close the display instantly, press k again.
On-screen information - digital only -
When viewing in Digital TV, the on-screen information (I-
Plate) will give the details of the channel programme
currently being viewed.
1 Press , to display the I-Plate.
7 Digital 1
7 Digital 2
0007
0070
8 Digital 1
8 Digital 2
0008
0080
8 Digital 3 0081
Discovery Mediacorp ABC
0009
0090 9 Digital 1
0091 9 Digital 2
0092 9 Digital 3
9 Digital
8 Digital 4 0082
Navigation List
Back Watch TV Select Channel
Navigate
Manual tuning
OK
OK
AV connection
OK
Picture position
Auto tuning
OK
Language
SET UP
MENU
Back Watch TV
EXIT
English
ABCD4
Stereo
Dec. 25
12:30
1202
Channel ABC Sydney
Now
News Today
Next Rock Concert in Sydney
SNR
TTX CC PG Dolby SD
I-Plate
Watch TV
More Info