Filter
Top Products
55
HL167 (E/F) Web 213:276
Chapter 6: Using the TV’s features
CC Selector
You can use the CC Selector to temporarily override the
default analog caption mode (set in Base CC Mode) for a
particular channel. However, once you change to another
analog channel, the closed caption setting will automatically
change back to the current Base CC Mode setting.
You can also use the CC Selector to select digital closed
caption services (if available). When such services are not
available, the CC Selector presents a default list of services.
If the selected service is not available, the next best service will
be used instead.
To select closed captions:
1 Press Y and open the Preferences menu.
2 Highlight CC Selector and press T.
3 Press B or b to select Closed Caption, and then press
C or c to select the desired service.
4 Press O.
Using the Closed Caption button on
the remote control
If you press ; when an analog channel is tuned:
• The CC selector will be active and will display CC1-4 and
T1-4 as the options.
• The audio selector will be disabled.
If you press ; when a digital channel is tuned:
• The CC selector will be active and will display the possible
caption options (available languages) for that channel or
service. For example, in addition to English, a channel
might offer closed captions in Spanish and/or French.
• The audio selector will be active and will offer different
audio choices for the digital channel (Dolby or AC3, for
example).
Adjusting the audio
Muting the sound
Press W to partially reduce (1/2 MUTE) or turn off (MUTE)
the sound. Each time you press W, the mute mode will
change in the following order:
If the closed caption mode is set to Off when you select
“MUTE” mode, the closed caption feature is automatically
activated. To mute the audio without automatically activating
the closed caption feature, use Z to set the volume to 0. See
“Using the closed caption mode” (- page 54) for more
information on closed caption modes.
Using the digital audio selector
You can use the Digital Audio Selector to conveniently
switch between audio tracks on a digital channel (for those
channels that have multiple audio tracks). This temporarily
overrides the audio track chosen by the language option under
Audio Setup (- “Selecting stereo/SAP broadcasts” on
page 56).
To use the digital audio selector:
1 Press Y and open the Audio menu.
2 Highlight Digital Audio Selector and press T.
3 Press B or b to select Audio, and then press C or c to
select the desired service.
4 Press O.
Input Labeling
Auto Input
Menu Language
Channel Browser Setup
Channel Labeling
CC Selector
English
Digital CC Settings
Preferences
Off
Base CC Mode
CC 1
None
Closed Caption
Audio
Volume1/2 Mute Mute
Digital Audio Selector
Audio Settings
Advanced Audio Settings
Audio
Audio Setup
CC 1Closed Caption
Audio
None
42HL167_EN.book Page 55 Thursday, May 17, 2007 5:09 PM