Filter
Top Products
69
HL167 (E/F) Web 213:276
Chapter 7: Using the TV’s advanced features
Using MPEG noise reduction
The MPEG noise reduction feature allows you to reduce
visible interference caused by MPEG compression. Choices
for MPEG noise reduction are Off, Low, Middle, and High.
Off is automatically selected when this feature is disabled
(“grayed out”).
To select the MPEG noise reduction level:
1 Press Y and open the Video menu.
2 Highlight Noise Reduction and press T.
3 Press B or b to highlight the MPEG Noise Reduction
field, and then press C or c to select either Off, Low,
Middle or High.
4 To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Using the ColorMaster
™
feature
The ColorMaster feature allows you to adjust standard colors.
The menu will consist of 3 items:
ColorMaster, Color Palette Adjustment, and Reset.
To turn on ColorMaster:
1 Press Y and open the Video menu.
2 Highlight ColorMaster and press T.
3 In the ColorMaster field, select On.
Note: If you select one of the factory-set picture modes
(Sports, Standard, Movie, or Document) and then change
the ColorMaster setting, the picture mode automatically
changes to Preference.
To turn off ColorMaster:
Select Off in Step 3 above.
Using Color Palette Adjustment
When color palette adjustment is selected, the list of base
colors will be displayed. You can select a base color to adjust.
Note: To use Color Palette Adjustment, ColorMaster must
be set to On.
To adjust the Base Colors:
1 From the ColorMaster menu, highlight Color Palette
Adjustment and press T.
Done
Noise Reduction ANT
Reset
CableClear
Auto
Low
MPEG Noise Reduction
Mode
Picture Settings
Noise Reduction
Video
Game Mode
ColorMaster
Theater Settings
Off
Sports
ColorMaster
ANT
Color Palette Adjustment
ColorMaster
On
Reset
ColorMaster
ANT
Color Palette Adjustment
ColorMaster
On
Reset
(continued)
42HL167_EN.book Page 69 Thursday, May 17, 2007 5:09 PM