Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
20
SKIP/SEARCH (DVD only)
Skips back to beginning of current DVD
chapter or locates previous chapters.
SKIP/SEARCH
(DVD only)
Skips forward to locate later DVD
chapters.
STOP
Stops the tape or DVD.
PLAY
Begins playback of a tape or DVD.
PAUSE
Press during play or record mode to
pause the picture; press again to restart.
CH y z
y selects the next higher channel;
z selects the next lower channel.
CLEAR (DVD only)
Press to reset the title and chapter
number.
y z x • (DVD only)
Press to navigate DVD menus (may not
work on some DVD players).
DVD MENU (DVD only)
Accesses DVD menus.
Channel Numbers (0-9)
Press to directly access channels (as
opposed to CH y z).
INFO (CBL/SAT only)
Displays on-screen information.
POWER
Turns the selected device on and off.
Using the remote control to operate a cable
converter box, satellite receiver, VCR, DVD
player, or HTIB (home theater in a box)
If you have a non-Toshiba device or a Toshiba device that the remote
control is not preprogrammed to operate, you must first program the
remote control to recognize the device (if you have not already done
so). See pages 18 and 19.
To use your TV remote control to operate a:
• cable converter box or satellite receiver, set the Device Switch to
CBL/SAT.
• VCR, set the Device Switch to VCR.
• DVD player or HTIB, set the Device Switch to DVD.
Note:
Even after the TV remote control is
programmed, it may not operate certain
features on your other device. If this happens
and you wish to use those features, you will
need to use the device’s original remote
control.
123
456
7
89
ENT
100
0
POWER
RECALL
CHRTN
FAV
FAV
TV / VIDEO
+10
PIC
S
I
ZE
EXIT
INFO
STOP
POP DIRECT CH MUTE SLEEP
TV/VCR PAUSE
FFREW
SKIP
/
SEARCH
SPLIT
SWAP POP CH
LIGHT
REC
CH SCAN
FREEZE SOURCE
PLAY
TV
CBL/SAT
VCR
DVD
VOLCH
FAVORITE
ENTER
DVDMENU
MENU
T
O
P
M
E
N
U
G
U
I
D
E
C
L
E
A
R
E
N
T
E
R
FF
Fast-forwards the tape or DVD.
(Press during play mode to view the
picture moving rapidly forward.)
Point the remote control
directly at the device.
+10 (DVD only)
Press to directly access
DVD chapters higher than 10.
TOP MENU (DVD only)
Accesses a DVD’s top menu.
ENTER
Required by some VCRs and cable
converter boxes to change the channel.
Device Switch
Set to “TV” to control the TV; “CBL/SAT” to
control a cable converter box or satellite
receiver; “VCR” to control a VCR; “DVD”
to control a DVD player or HTIB.
TV/VCR (VCR only)
To view one program while recording
another, press to select TV mode.
REW
Rewinds the tape or DVD. (Press during play mode
to view the picture moving rapidly backward.)
REC (VCR only)
Starts tape recording.
GUIDE (CBL/SAT only)
Displays channel guide.